Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interseal 670HS Temperate Low-surface-treatment epoxy coating

Home | All models | Industrial coatings | Interseal 670HS Temperate

Interseal 670HS Temperate Low-surface-treatment epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 82% ± 3% (depending on colour) · spreading rate 6.56 m²/L · DFT 100-250 µm (4-10 mil) · density 1.60 kg/L (13.4 lb/US gal). Drying at 25 °C: 5 h touch dry, 18 h hard dry.

Basic data

Model
Interseal 670HS Temperate (Low-surface-treatment epoxy coating)
Product type
Low-surface-treatment epoxy coating
Category
Industrial coatings
Volume solids
82% ± 3% (depending on colour)
Theoretical spreading rate
6.56 m²/L
Recommended dry film thickness
100-250 µm (4-10 mil)
Density (specific gravity)
1.60 kg/L (13.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 5 h / Hard dry 18 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interseal 670HS Temperate (Low-surface-treatment epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Interseal 670HS Temperate, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.152 L/m² for Interseal 670HS Temperate, excluding application losses. That is about 15.2 L per 100 m². At a wet film of 122–305 µm, coverage is 4.10 m² per kg. All figures are calculated.

System and application

For Interseal 670HS Temperate, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

Consumption for Interseal 670HS Temperate is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interseal 670HS Temperate Low-surface-treatment epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interseal 670HS Temperate

  • System selection for Interseal 670HS Temperate: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interseal 670HS Temperate: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interseal 670HS Temperate: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.