Industrial coatings
Interseal 1052 Epoxy coating
Home | All models | Industrial coatings | Interseal 1052
Interseal 1052 Epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 83%, spreading rate 6.64 m²/L, DFT 75-250 µm (3-10 mil), density 1.63 kg/L (13.6 lb/US gal). Drying at 25 °C: 2 h touch dry, 5 h hard dry.
Basic data
- Model
- Interseal 1052 (Epoxy coating)
- Product type
- Epoxy coating
- Category
- Industrial coatings
- Volume solids
- 83%
- Theoretical spreading rate
- 6.64 m²/L
- Recommended dry film thickness
- 75-250 µm (3-10 mil)
- Density (specific gravity)
- 1.63 kg/L (13.6 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interseal 1052 (Epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Interseal 1052, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.151 L/m² for Interseal 1052, excluding application losses. That is about 15.1 L per 100 m². At a wet film of 90–301 µm, coverage is 4.07 m² per kg. All figures are calculated.
System and application
For Interseal 1052, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
Consumption for Interseal 1052 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interseal 1052 Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interseal 1052 Epoxy coating
- System selection for Interseal 1052 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interseal 1052 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interseal 1052 Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

