Industrial coatings
Interplate 837HS Inorganic zinc silicate
Home | All models | Industrial coatings | Interplate 837HS
Interplate 837HS Inorganic zinc silicate is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 30-75 µm (1.2-3 mil), density 1.714 kg/L (14.3 lb/US gal), solids 45% ± 3%, spreading rate 6 m²/L. Drying at 25 °C: 20 min touch dry, 50 min hard dry.
Basic data
- Model
- Interplate 837HS (Inorganic zinc silicate)
- Product type
- Inorganic zinc silicate
- Category
- Industrial coatings
- Volume solids
- 45% ± 3%
- Theoretical spreading rate
- 6 m²/L
- Recommended dry film thickness
- 30-75 µm (1.2-3 mil)
- Density (specific gravity)
- 1.714 kg/L (14.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 20 min / Hard dry 50 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interplate 837HS (Inorganic zinc silicate) data sheet; other conditions are not listed.
- Other parameters
- For Interplate 837HS, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.167 L/m² for Interplate 837HS, excluding application losses. That is about 16.7 L per 100 m². At a wet film of 67–167 µm, coverage is 3.50 m² per kg. All figures are calculated.
System and application
For Interplate 837HS, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interplate 837HS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interplate 837HS Inorganic zinc silicate”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interplate 837HS
- System selection for Interplate 837HS: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interplate 837HS: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interplate 837HS: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

