Industrial coatings
Interplate 408 Shop primer
Home | All models | Industrial coatings | Interplate 408
Interplate 408 Shop primer is an epoxy coating for primer use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: density 1.12 kg/L (9.3 lb/US gal), spreading rate 9.60 m²/L, solids 24% ± 2%. At 25 °C it is 5 min touch dry and 6 h hard dry.
Basic data
- Model
- Interplate 408
- Product type
- Shop primer
- Category
- Industrial coatings
- Volume solids
- 24% ± 2%
- Theoretical spreading rate
- 9.60 m²/L
- Density (specific gravity)
- 1.12 kg/L (9.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 5 min / Hard dry 6 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interplate 408 data sheet; other conditions are not listed.
- Other parameters
- For Interplate 408, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.104 L/m² for Interplate 408, excluding application losses. That is about 10.4 L per 100 m². Coverage is 8.57 m² per kg. All figures are calculated.
System and application
Interplate 408 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Interplate 408 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interplate 408 Shop primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interplate 408 Shop primer
- System selection for Interplate 408 Shop primer: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interplate 408 Shop primer: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interplate 408 Shop primer: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

