Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interplate 317 Temporary protective primer

Home | All models | Industrial coatings | Interplate 317

Interplate 317 Temporary protective primer is an inorganic zinc silicate coating for primer use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 28% · spreading rate 18.67 m²/L · DFT 10-25 µm (0.4-1 mil) · density 1.5 kg/L (12.5 lb/US gal). Drying at 25 °C: 3 min touch dry, 5 min hard dry.

Industrial coatingsPrimerInorganic zinc silicate

Basic data

Model
Interplate 317
Product type
Temporary protective primer
Category
Industrial coatings
Volume solids
28%
Theoretical spreading rate
18.67 m²/L
Recommended dry film thickness
10-25 µm (0.4-1 mil)
Density (specific gravity)
1.5 kg/L (12.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 min / Hard dry 5 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interplate 317 data sheet; other conditions are not listed.
Other parameters
For Interplate 317, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.054 L/m² for Interplate 317, excluding application losses. That is about 5.4 L per 100 m². At a wet film of 36–89 µm, coverage is 12.45 m² per kg. The values above are calculated.

System and application

Interplate 317 as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.

Consumption for Interplate 317 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interplate 317 Temporary protective primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interplate 317

  • System selection for Interplate 317: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interplate 317: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interplate 317: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.