Industrial coatings
Interline 984 Lining coating
Home | All models | Industrial coatings | Interline 984
Interline 984 Lining coating is an epoxy coating, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: solids 100% · density 1 .33 kg/L (11.1 lb/US gal) · spreading rate 2.50 m²/L. Drying at 25 °C: 6 h touch dry, 12 h hard dry.
Basic data
- Model
- Interline 984
- Product type
- Lining coating
- Category
- Industrial coatings
- Volume solids
- 100%
- Theoretical spreading rate
- 2.50 m²/L
- Density (specific gravity)
- 1 .33 kg/L (11.1 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 6 h / Hard dry 12 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 984 data sheet; other conditions are not listed.
- Other parameters
- For Interline 984, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.400 L/m² for Interline 984, excluding application losses. That is about 40.0 L per 100 m². Coverage is 2.50 m² per kg. These are theoretical values.
System and application
For Interline 984, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
Consumption for Interline 984 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 984 Lining coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interline 984 Lining coating
- System selection for Interline 984 Lining coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interline 984 Lining coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interline 984 Lining coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

