Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interline 859 Epoxy-phenolic resin coating (conductive)

Home | All models | Industrial coatings | Interline 859

Interline 859 Epoxy-phenolic resin coating (conductive) is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 76% · density 1.48 kg/L (12.4 lb/US gal) · DFT 100-150 µm (4-6 mil) · spreading rate 6.08 m²/L. At 25 °C it is 4 h touch dry and 8 h hard dry.

Industrial coatingsEpoxyPhenolic

Basic data

Model
Interline 859 (Epoxy-phenolic resin coating (conductive))
Product type
Epoxy-phenolic resin coating (conductive)
Category
Industrial coatings
Volume solids
76%
Theoretical spreading rate
6.08 m²/L
Recommended dry film thickness
100-150 µm (4-6 mil)
Density (specific gravity)
1.48 kg/L (12.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 4 h / Hard dry 8 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 859 (Epoxy-phenolic resin coating (conductive)) data sheet; other conditions are not listed.
Other parameters
For Interline 859, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.164 L/m² for Interline 859, excluding application losses. That is about 16.4 L per 100 m². At a wet film of 132–197 µm, coverage is 4.11 m² per kg. The values above are calculated.

System and application

The substrate condition for Interline 859 has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Technical data for Interline 859 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 859 Epoxy-phenolic resin coating (conductive)”; parameters not listed here are governed by that data sheet.

Enquiries on Interline 859

  • System selection for Interline 859: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interline 859: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interline 859: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.