Industrial coatings
Interline 850 Epoxy-phenolic storage and tank coating
Home | All models | Industrial coatings | Interline 850
Interline 850 Epoxy-phenolic storage and tank coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 76%, spreading rate 6.08 m²/L, DFT 100-150 µm (4-6 mil), density 1.57 kg/L (13.1 lb/US gal). Drying at 25 °C: 5 h touch dry, 8 h hard dry.
Basic data
- Model
- Interline 850 (Epoxy-phenolic storage and tank coating)
- Product type
- Epoxy-phenolic storage and tank coating
- Category
- Industrial coatings
- Volume solids
- 76%
- Theoretical spreading rate
- 6.08 m²/L
- Recommended dry film thickness
- 100-150 µm (4-6 mil)
- Density (specific gravity)
- 1.57 kg/L (13.1 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 8 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 850 (Epoxy-phenolic storage and tank coating) data sheet; other conditions are not listed.
- Other parameters
- For Interline 850, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.164 L/m² for Interline 850, excluding application losses. That is about 16.4 L per 100 m². At a wet film of 132–197 µm, coverage is 3.87 m² per kg. The values above are calculated.
System and application
For Interline 850, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interline 850 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 850 Epoxy-phenolic storage and tank coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interline 850
- System selection for Interline 850: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interline 850: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interline 850: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

