Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interline 399C Epoxy-phenolic resin coating

Home | All models | Industrial coatings | Interline 399C

Interline 399C Epoxy-phenolic resin coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.78 kg/L (14.9 lb/US gal) · solids 70% ± 2% · spreading rate 5.60 m²/L · DFT 90-150 µm (3.6-6 mil). At 25 °C it is 3 h touch dry and 5 h hard dry.

Industrial coatingsEpoxyPhenolic

Basic data

Model
Interline 399C (Epoxy-phenolic resin coating)
Product type
Epoxy-phenolic resin coating
Category
Industrial coatings
Volume solids
70% ± 2%
Theoretical spreading rate
5.60 m²/L
Recommended dry film thickness
90-150 µm (3.6-6 mil)
Density (specific gravity)
1.78 kg/L (14.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 399C (Epoxy-phenolic resin coating) data sheet; other conditions are not listed.
Other parameters
For Interline 399C, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.179 L/m² for Interline 399C, excluding application losses. That is about 17.9 L per 100 m². At a wet film of 129–214 µm, coverage is 3.15 m² per kg. These are theoretical values.

System and application

The substrate condition for Interline 399C has to be checked before application. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Interline 399C are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 399C Epoxy-phenolic resin coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interline 399C

  • System selection for Interline 399C: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interline 399C: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interline 399C: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.