Industrial coatings
Interlac 665 Alkyd topcoat
Home | All models | Industrial coatings | Interlac 665
Interlac 665 Alkyd topcoat is supplied under the International Paint brand for topcoat use. It sits in the Industrial coatings range. Technical data list: solids 48% ± 3% (depending on colour) · spreading rate 12 m²/L · density 1.11 kg/L (9.3 lb/US gal). Drying at 25 °C: 6 h touch dry, 24 h hard dry.
Basic data
- Model
- Interlac 665 (Alkyd topcoat)
- Product type
- Alkyd topcoat
- Category
- Industrial coatings
- Volume solids
- 48% ± 3% (depending on colour)
- Theoretical spreading rate
- 12 m²/L
- Density (specific gravity)
- 1.11 kg/L (9.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 6 h / Hard dry 24 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interlac 665 (Alkyd topcoat) data sheet; other conditions are not listed.
- Other parameters
- For Interlac 665, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.083 L/m² for Interlac 665, excluding application losses. That is about 8.3 L per 100 m². Coverage is 10.81 m² per kg. All figures are calculated.
System and application
Interlac 665 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are specified in the technical data sheet.
Consumption for Interlac 665 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interlac 665 Alkyd topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interlac 665 Alkyd topcoat
- System selection for Interlac 665 Alkyd topcoat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interlac 665 Alkyd topcoat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interlac 665 Alkyd topcoat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

