Industrial coatings / Marine coatings
Intergard 7500 High-solids pure epoxy general-purpose primer
Home | All models | Industrial coatings | Intergard 7500
Intergard 7500 High-solids pure epoxy general-purpose primer is supplied under the International Paint brand for primer use. It sits in the Industrial coatings range. Technical data list: DFT 100-200 µm (4-8 mil) · spreading rate 6.40 m²/L · solids 80%. At 25 °C it is 60 min touch dry and 3 h hard dry. Intergard 7500 is used in both industrial and marine work.
Basic data
- Model
- Intergard 7500 (High-solids pure epoxy general-purpose primer)
- Product type
- High-solids pure epoxy general-purpose primer
- Category
- Industrial coatings / Marine coatings
- Volume solids
- 80%
- Theoretical spreading rate
- 6.40 m²/L
- Recommended dry film thickness
- 100-200 µm (4-8 mil)
- Drying (25°C substrate temperature)
- Touch dry 60 min / Hard dry 3 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 7500 (High-solids pure epoxy general-purpose primer) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 7500, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.156 L/m² for Intergard 7500, excluding application losses. That is about 15.6 L per 100 m². At a wet film of 125–250 µm. All figures are calculated.
System and application
Intergard 7500 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Intergard 7500 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 7500 High-solids pure epoxy general-purpose primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 7500
- System selection for Intergard 7500: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 7500: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 7500: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

