Industrial coatings
Intergard 740 Epoxy topcoat
Home | All models | Industrial coatings | Intergard 740
Intergard 740 Epoxy topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: density 1.34 kg/L (11.2 lb/US gal), solids 51% ± 3% (depending on colour), spreading rate 10.20 m²/L. Drying at 25 °C: 3 h touch dry, 16 h hard dry.
Basic data
- Model
- Intergard 740 (Epoxy topcoat)
- Product type
- Epoxy topcoat
- Category
- Industrial coatings
- Volume solids
- 51% ± 3% (depending on colour)
- Theoretical spreading rate
- 10.20 m²/L
- Density (specific gravity)
- 1.34 kg/L (11.2 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 740 (Epoxy topcoat) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 740, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.098 L/m² for Intergard 740, excluding application losses. That is about 9.8 L per 100 m². Coverage is 7.61 m² per kg. The values above are calculated.
System and application
Intergard 740 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intergard 740 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 740 Epoxy topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 740 Epoxy topcoat
- System selection for Intergard 740 Epoxy topcoat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 740 Epoxy topcoat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 740 Epoxy topcoat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

