Industrial coatings
Intergard 410 Epoxy intermediate / topcoat
Home | All models | Industrial coatings | Intergard 410
Intergard 410 Epoxy intermediate / topcoat is supplied under the International Paint brand for intermediate and topcoat use. It is catalogued under Industrial coatings. The data sheet gives: DFT 100-150 µm (4-6 mil) · density 1.30 kg/L (10.8 lb/US gal) · solids 60% ± 3% (depending on colour) · spreading rate 4.80 m²/L. Drying at 25 °C: 2 h touch dry, 10 h hard dry.
Basic data
- Model
- Intergard 410 (Epoxy intermediate / topcoat)
- Product type
- Epoxy intermediate / topcoat
- Category
- Industrial coatings
- Volume solids
- 60% ± 3% (depending on colour)
- Theoretical spreading rate
- 4.80 m²/L
- Recommended dry film thickness
- 100-150 µm (4-6 mil)
- Density (specific gravity)
- 1.30 kg/L (10.8 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 10 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 410 (Epoxy intermediate / topcoat) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 410, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.208 L/m² for Intergard 410, excluding application losses. That is about 20.8 L per 100 m². At a wet film of 167–250 µm, coverage is 3.69 m² per kg. The values above are calculated.
System and application
Intergard 410 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are set out in the technical data.
TDS and SDS for Intergard 410 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 410 Epoxy intermediate / topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 410
- System selection for Intergard 410: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 410: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 410: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

