Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intergard 400 Anti-corrosive high-build primer / intermediate or topcoat

Home | All models | Industrial coatings | Intergard 400

Intergard 400 Anti-corrosive high-build primer / intermediate or topcoat is an epoxy coating for primer and intermediate use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: spreading rate 5.20 m²/L · DFT 100-150 µm (4-6 mil) · density 1.68 kg/L (14.0 lb/US gal) · solids 65%. At 25 °C it is 2 h touch dry and 8 h hard dry.

Industrial coatingsPrimerIntermediateEpoxy

Basic data

Model
Intergard 400
Product type
Anti-corrosive high-build primer / intermediate or topcoat
Category
Industrial coatings
Volume solids
65%
Theoretical spreading rate
5.20 m²/L
Recommended dry film thickness
100-150 µm (4-6 mil)
Density (specific gravity)
1.68 kg/L (14.0 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 8 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 400 data sheet; other conditions are not listed.
Other parameters
For Intergard 400, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.192 L/m² for Intergard 400, excluding application losses. That is about 19.2 L per 100 m². At a wet film of 154–231 µm, coverage is 3.10 m² per kg. These are theoretical values.

System and application

Intergard 400 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Technical data for Intergard 400 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 400 Anti-corrosive high-build primer / intermediate or topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Intergard 400

  • System selection for Intergard 400: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intergard 400: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intergard 400: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.