Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intergard 345 Epoxy coating

Home | All models | Industrial coatings | Intergard 345

Intergard 345 Epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 70%, density 1.45 kg/L (12.1 lb/US gal), DFT 100-150 µm (4-6 mil), spreading rate 5.60 m²/L. At 25 °C it is 60 min touch dry and 2.5 h hard dry.

Basic data

Model
Intergard 345 (Epoxy coating)
Product type
Epoxy coating
Category
Industrial coatings
Volume solids
70%
Theoretical spreading rate
5.60 m²/L
Recommended dry film thickness
100-150 µm (4-6 mil)
Density (specific gravity)
1.45 kg/L (12.1 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 60 min / Hard dry 2.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 345 (Epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Intergard 345, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.179 L/m² for Intergard 345, excluding application losses. That is about 17.9 L per 100 m². At a wet film of 143–214 µm, coverage is 3.86 m² per kg. All figures are calculated.

System and application

The substrate condition for Intergard 345 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Intergard 345 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 345 Epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intergard 345 Epoxy coating

  • System selection for Intergard 345 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intergard 345 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intergard 345 Epoxy coating: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.