Industrial coatings
Intergard 276 Protective primer after blasting
Home | All models | Industrial coatings | Intergard 276
Intergard 276 Protective primer after blasting is an epoxy coating for primer use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 47% · spreading rate 11.80 m²/L · DFT 25-40 µm (1-1.6 mil) · density 1.53 kg/L (12.8 lb/US gal). Drying at 25 °C: 30 min touch dry, 12 h hard dry.
Basic data
- Model
- Intergard 276
- Product type
- Protective primer after blasting
- Category
- Industrial coatings
- Volume solids
- 47%
- Theoretical spreading rate
- 11.80 m²/L
- Recommended dry film thickness
- 25-40 µm (1-1.6 mil)
- Density (specific gravity)
- 1.53 kg/L (12.8 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 12 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 276 data sheet; other conditions are not listed.
- Other parameters
- For Intergard 276, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.085 L/m² for Intergard 276, excluding application losses. That is about 8.5 L per 100 m². At a wet film of 53–85 µm, coverage is 7.71 m² per kg. All figures are calculated.
System and application
Intergard 276 as a primer, Surface preparation comes first. Its mixing ratio and pot life are specified in the technical data sheet.
Consumption for Intergard 276 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 276 Protective primer after blasting”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 276
- System selection for Intergard 276: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 276: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 276: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

