Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intergard 251HS Epoxy zinc phosphate primer

Home | All models | Industrial coatings | Intergard 251HS

Intergard 251HS Epoxy zinc phosphate primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. The data sheet gives: solids 75% ± 2% · spreading rate 10 m²/L · DFT 75-200 µm (3-8 mil) · density 1.59 kg/L (13.3 lb/US gal). Drying at 25 °C: 30 min touch dry, 2.25 h hard dry.

Basic data

Model
Intergard 251HS (Epoxy zinc phosphate primer)
Product type
Epoxy zinc phosphate primer
Category
Industrial coatings
Volume solids
75% ± 2%
Theoretical spreading rate
10 m²/L
Recommended dry film thickness
75-200 µm (3-8 mil)
Density (specific gravity)
1.59 kg/L (13.3 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 2.25 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 251HS (Epoxy zinc phosphate primer) data sheet; other conditions are not listed.
Other parameters
For Intergard 251HS, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.100 L/m² for Intergard 251HS, excluding application losses. That is about 10.0 L per 100 m². At a wet film of 100–267 µm, coverage is 6.29 m² per kg. The values above are calculated.

System and application

Intergard 251HS as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.

Consumption for Intergard 251HS is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 251HS Epoxy zinc phosphate primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intergard 251HS

  • System selection for Intergard 251HS: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intergard 251HS: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intergard 251HS: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.