Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intergard 251 Epoxy zinc phosphate primer

Home | All models | Industrial coatings | Intergard 251

Intergard 251 Epoxy zinc phosphate primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. The data sheet gives: solids 63% ± 2%, density 1.38 kg/L (11.5 lb/US gal), DFT 50-75 µm (2-3 mil), spreading rate 8.40 m²/L. At 25 °C it is 45 min touch dry and 3 h hard dry.

Basic data

Model
Intergard 251 (Epoxy zinc phosphate primer)
Product type
Epoxy zinc phosphate primer
Category
Industrial coatings
Volume solids
63% ± 2%
Theoretical spreading rate
8.40 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
1.38 kg/L (11.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 45 min / Hard dry 3 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 251 (Epoxy zinc phosphate primer) data sheet; other conditions are not listed.
Other parameters
For Intergard 251, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.119 L/m² for Intergard 251, excluding application losses. That is about 11.9 L per 100 m². At a wet film of 79–119 µm, coverage is 6.09 m² per kg. The values above are calculated.

System and application

Intergard 251 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.

Technical data for Intergard 251 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 251 Epoxy zinc phosphate primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intergard 251

  • System selection for Intergard 251: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intergard 251: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intergard 251: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.