Industrial coatings
Intergard 242 Epoxy coating
Home | All models | Industrial coatings | Intergard 242
Intergard 242 Epoxy coating is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. Parameters for Intergard 242 are tabulated below. At 25 °C it is 1 touch dry and 14 hard dry.
Basic data
- Model
- Intergard 242
- Product type
- Epoxy coating
- Category
- Industrial coatings
- Drying (25°C substrate temperature)
- Touch dry 1 / Hard dry 14
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 242 data sheet; other conditions are not listed.
- Other parameters
- For Intergard 242, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Without a listed rate, consumption for Intergard 242 is assessed from the TDS.
System and application
Intergard 242 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Technical data for Intergard 242 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 242 Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 242 Epoxy coating
- System selection for Intergard 242 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 242 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 242 Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

