Industrial coatings
Interfine 878 Acrylic polysiloxane topcoat
Home | All models | Industrial coatings | Interfine 878
Interfine 878 Acrylic polysiloxane topcoat is supplied under the International Paint brand for topcoat use. It sits in the Industrial coatings range. Technical data list: solids 72% · spreading rate 12 m²/L · DFT 50-75 µm (2-3 mil) · density 1.34 kg/L (11.2 lb/US gal). Drying at 25 °C: 3 h touch dry, 4 h hard dry.
Basic data
- Model
- Interfine 878 (Acrylic polysiloxane topcoat)
- Product type
- Acrylic polysiloxane topcoat
- Category
- Industrial coatings
- Volume solids
- 72%
- Theoretical spreading rate
- 12 m²/L
- Recommended dry film thickness
- 50-75 µm (2-3 mil)
- Density (specific gravity)
- 1.34 kg/L (11.2 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interfine 878 (Acrylic polysiloxane topcoat) data sheet; other conditions are not listed.
- Other parameters
- For Interfine 878, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.083 L/m² for Interfine 878, excluding application losses. That is about 8.3 L per 100 m². At a wet film of 69–104 µm, coverage is 8.96 m² per kg. All figures are calculated.
System and application
Interfine 878 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are specified in the technical data sheet.
Consumption for Interfine 878 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interfine 878 Acrylic polysiloxane topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interfine 878
- System selection for Interfine 878: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interfine 878: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interfine 878: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

