Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interfine 691 Modified acrylic topcoat

Home | All models | Industrial coatings | Interfine 691

Interfine 691 Modified acrylic topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: spreading rate 10.60 m²/L, solids 53% ± 3% (depending on colour), density 1.40 kg/L (11.7 lb/US gal) depending on. At 25 °C it is 2 h touch dry and 8 h hard dry.

Industrial coatingsTopcoatAcrylic

Basic data

Model
Interfine 691 (Modified acrylic topcoat)
Product type
Modified acrylic topcoat
Category
Industrial coatings
Volume solids
53% ± 3% (depending on colour)
Theoretical spreading rate
10.60 m²/L
Density (specific gravity)
1.40 kg/L (11.7 lb/US gal) depending on
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 8 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interfine 691 (Modified acrylic topcoat) data sheet; other conditions are not listed.
Other parameters
For Interfine 691, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.094 L/m² for Interfine 691, excluding application losses. That is about 9.4 L per 100 m². Coverage is 7.57 m² per kg. The values above are calculated.

System and application

Interfine 691 as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are set out in the technical data.

Technical data for Interfine 691 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interfine 691 Modified acrylic topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interfine 691 Modified

  • System selection for Interfine 691 Modified: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interfine 691 Modified: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interfine 691 Modified: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.