Industrial coatings
Interfine 2700 Epoxy polysiloxane
Home | All models | Industrial coatings | Interfine 2700
Interfine 2700 Epoxy polysiloxane is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: spreading rate 6.88 m²/L · solids 86% ± 3% (depending on colour) · density 1.37 kg/L (11.4 lb/US gal) · DFT 76-178 µm (3-7.1 mil). Drying at 25 °C: 4.5 h touch dry, 9 h hard dry.
Basic data
- Model
- Interfine 2700 (Epoxy polysiloxane)
- Product type
- Epoxy polysiloxane
- Category
- Industrial coatings
- Volume solids
- 86% ± 3% (depending on colour)
- Theoretical spreading rate
- 6.88 m²/L
- Recommended dry film thickness
- 76-178 µm (3-7.1 mil)
- Density (specific gravity)
- 1.37 kg/L (11.4 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 4.5 h / Hard dry 9 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interfine 2700 (Epoxy polysiloxane) data sheet; other conditions are not listed.
- Other parameters
- For Interfine 2700, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.145 L/m² for Interfine 2700, excluding application losses. That is about 14.5 L per 100 m². At a wet film of 88–207 µm, coverage is 5.02 m² per kg. These are theoretical values.
System and application
For Interfine 2700, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for Interfine 2700 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interfine 2700 Epoxy polysiloxane”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interfine 2700 Epoxy
- System selection for Interfine 2700 Epoxy: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interfine 2700 Epoxy: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interfine 2700 Epoxy: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

