Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8863 Fluorocarbon topcoat

Home | All models | Industrial coatings | Interdur 8863

Interdur 8863 Fluorocarbon topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: DFT 40-60 µm (1.6-2.4 mil) · spreading rate 10.60 m²/L · solids 53% ± 3% (depending on colour) · density 1.43 kg/L (11.9 lb/US gal). At 25 °C it is 30 min touch dry and 12 h hard dry.

Industrial coatingsTopcoatFluorocarbon

Basic data

Model
Interdur 8863 (Fluorocarbon topcoat)
Product type
Fluorocarbon topcoat
Category
Industrial coatings
Volume solids
53% ± 3% (depending on colour)
Theoretical spreading rate
10.60 m²/L
Recommended dry film thickness
40-60 µm (1.6-2.4 mil)
Density (specific gravity)
1.43 kg/L (11.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 12 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8863 (Fluorocarbon topcoat) data sheet; other conditions are not listed.
Other parameters
For Interdur 8863, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.094 L/m² for Interdur 8863, excluding application losses. That is about 9.4 L per 100 m². At a wet film of 75–113 µm, coverage is 7.41 m² per kg. The values above are calculated.

System and application

Interdur 8863 as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Interdur 8863 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8863 Fluorocarbon topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8863 Fluorocarbon

  • System selection for Interdur 8863 Fluorocarbon: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8863 Fluorocarbon: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8863 Fluorocarbon: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.