Industrial coatings
Interdur 8841 Epoxy coating
Home | All models | Industrial coatings | Interdur 8841
Interdur 8841 Epoxy coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.63 kg/L (13.6 lb/US gal) · solids 83% · spreading rate 6.64 m²/L · DFT 75-250 µm (3-10 mil). At 25 °C it is 1.5 h touch dry and 3.5 h hard dry.
Basic data
- Model
- Interdur 8841 (Epoxy coating)
- Product type
- Epoxy coating
- Category
- Industrial coatings
- Volume solids
- 83%
- Theoretical spreading rate
- 6.64 m²/L
- Recommended dry film thickness
- 75-250 µm (3-10 mil)
- Density (specific gravity)
- 1.63 kg/L (13.6 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 1.5 h / Hard dry 3.5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8841 (Epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8841, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.151 L/m² for Interdur 8841, excluding application losses. That is about 15.1 L per 100 m². At a wet film of 90–301 µm, coverage is 4.07 m² per kg. These are theoretical values.
System and application
The substrate condition for Interdur 8841 has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Interdur 8841 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8841 Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8841 Epoxy coating
- System selection for Interdur 8841 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8841 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8841 Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

