Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8816 Epoxy zinc-rich primer

Home | All models | Industrial coatings | Interdur 8816

Interdur 8816 Epoxy zinc-rich primer is supplied under the International Paint brand for primer use. It sits in the Industrial coatings range. It provides zinc-rich priming. Technical data list: solids 67 ± 2% · density 1.89 kg/L (15.8 lb/US gal) · DFT 60-125 µm (2.4-5 mil) · spreading rate 11.17 m²/L. At 25 °C it is 10 min touch dry and 90 min hard dry.

Industrial coatingsPrimerZinc-rich primerEpoxy

Basic data

Model
Interdur 8816 (Epoxy zinc-rich primer)
Product type
Epoxy zinc-rich primer
Category
Industrial coatings
Volume solids
67 ± 2%
Theoretical spreading rate
11.17 m²/L
Recommended dry film thickness
60-125 µm (2.4-5 mil)
Density (specific gravity)
1.89 kg/L (15.8 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 10 min / Hard dry 90 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8816 (Epoxy zinc-rich primer) data sheet; other conditions are not listed.
Other parameters
For Interdur 8816, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.090 L/m² for Interdur 8816, excluding application losses. That is about 9.0 L per 100 m². At a wet film of 3000–6250 µm, coverage is 5.91 m² per kg. All figures are calculated.

System and application

Interdur 8816 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Interdur 8816 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8816 Epoxy zinc-rich primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8816 Epoxy zinc-rich

  • System selection for Interdur 8816 Epoxy zinc-rich: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8816 Epoxy zinc-rich: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8816 Epoxy zinc-rich: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.