Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8814 Low-surface-treatment epoxy coating

Home | All models | Industrial coatings | Interdur 8814

Interdur 8814 Low-surface-treatment epoxy coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.32 kg/L (11.0 lb/US gal) · solids 68% ± 2% · spreading rate 4.53 m²/L · DFT 100-200 µm (4-8 mil). At 25 °C it is 2 h touch dry and 5 h hard dry.

Basic data

Model
Interdur 8814 (Low-surface-treatment epoxy coating)
Product type
Low-surface-treatment epoxy coating
Category
Industrial coatings
Volume solids
68% ± 2%
Theoretical spreading rate
4.53 m²/L
Recommended dry film thickness
100-200 µm (4-8 mil)
Density (specific gravity)
1.32 kg/L (11.0 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8814 (Low-surface-treatment epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Interdur 8814, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.221 L/m² for Interdur 8814, excluding application losses. That is about 22.1 L per 100 m². At a wet film of 147–294 µm, coverage is 3.43 m² per kg. These are theoretical values.

System and application

The substrate condition for Interdur 8814 has to be checked before application. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Interdur 8814 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8814 Low-surface-treatment epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8814

  • System selection for Interdur 8814: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8814: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8814: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.