Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8812 Temporary protective primer

Home | All models | Industrial coatings | Interdur 8812

Interdur 8812 Temporary protective primer is an inorganic zinc silicate coating for primer use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 28%, density 1.5 kg/L (12.5 lb/US gal), DFT 10-25 µm (0.4-1 mil), spreading rate 18.67 m²/L. At 25 °C it is 3 min touch dry and 5 min hard dry.

Industrial coatingsPrimerInorganic zinc silicate

Basic data

Model
Interdur 8812
Product type
Temporary protective primer
Category
Industrial coatings
Volume solids
28%
Theoretical spreading rate
18.67 m²/L
Recommended dry film thickness
10-25 µm (0.4-1 mil)
Density (specific gravity)
1.5 kg/L (12.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 min / Hard dry 5 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8812 data sheet; other conditions are not listed.
Other parameters
For Interdur 8812, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.054 L/m² for Interdur 8812, excluding application losses. That is about 5.4 L per 100 m². At a wet film of 36–89 µm, coverage is 12.45 m² per kg. The values above are calculated.

System and application

Interdur 8812 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.

Technical data for Interdur 8812 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8812 Temporary protective primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8812

  • System selection for Interdur 8812: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8812: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8812: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.