Industrial coatings
Interdur 8809 Epoxy metallic zinc-rich primer
Home | All models | Industrial coatings | Interdur 8809
Interdur 8809 Epoxy metallic zinc-rich primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. It provides zinc-rich priming. The data sheet gives: DFT 50-100 µm (2-4 mil) · spreading rate 9.33 m²/L · solids 70% · density 2.94 kg/L (24.5 lb/US gal). At 25 °C it is 1.5 h touch dry and 7 h hard dry.
Basic data
- Model
- Interdur 8809
- Product type
- Epoxy metallic zinc-rich primer
- Category
- Industrial coatings
- Volume solids
- 70%
- Theoretical spreading rate
- 9.33 m²/L
- Recommended dry film thickness
- 50-100 µm (2-4 mil)
- Density (specific gravity)
- 2.94 kg/L (24.5 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 1.5 h / Hard dry 7 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8809 data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8809, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.107 L/m² for Interdur 8809, excluding application losses. That is about 10.7 L per 100 m². At a wet film of 71–143 µm, coverage is 3.17 m² per kg. The values above are calculated.
System and application
Interdur 8809 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Interdur 8809 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8809 Epoxy metallic zinc-rich primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8809
- System selection for Interdur 8809: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8809: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8809: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

