Industrial coatings
Interdur 8808 Epoxy zinc-rich primer
Home | All models | Industrial coatings | Interdur 8808
Interdur 8808 Epoxy zinc-rich primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. Its function is zinc-rich priming. Published figures are: spreading rate 9.29 m²/L · solids 65% ± 2% · density 1.8 kg/L (15.0 lb/US gal) · DFT 50-100 µm (2-4 mil). Drying at 25 °C: 30 min touch dry, 2 h hard dry.
Basic data
- Model
- Interdur 8808 (Epoxy zinc-rich primer)
- Product type
- Epoxy zinc-rich primer
- Category
- Industrial coatings
- Volume solids
- 65% ± 2%
- Theoretical spreading rate
- 9.29 m²/L
- Recommended dry film thickness
- 50-100 µm (2-4 mil)
- Density (specific gravity)
- 1.8 kg/L (15.0 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 2 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8808 (Epoxy zinc-rich primer) data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8808, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.108 L/m² for Interdur 8808, excluding application losses. That is about 10.8 L per 100 m². At a wet film of 77–154 µm, coverage is 5.16 m² per kg. These are theoretical values.
System and application
Interdur 8808 as a primer, Surface preparation comes first. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for Interdur 8808 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8808 Epoxy zinc-rich primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8808 Epoxy zinc-rich
- System selection for Interdur 8808 Epoxy zinc-rich: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8808 Epoxy zinc-rich: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8808 Epoxy zinc-rich: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

