Industrial coatings
Interdur 8807 Solvent-borne inorganic zinc silicate primer
Home | All models | Industrial coatings | Interdur 8807
Interdur 8807 Solvent-borne inorganic zinc silicate primer is supplied under the International Paint brand for primer use. It sits in the Industrial coatings range. It provides zinc-rich priming. Technical data list: solids 72% · density 2.62 kg/L (21.9 lb/US gal) · DFT 50-100 µm (2-4 mil) · spreading rate 9.60 m²/L. At 25 °C it is 5 h touch dry and 18 h hard dry.
Basic data
- Model
- Interdur 8807
- Product type
- Solvent-borne inorganic zinc silicate primer
- Category
- Industrial coatings
- Volume solids
- 72%
- Theoretical spreading rate
- 9.60 m²/L
- Recommended dry film thickness
- 50-100 µm (2-4 mil)
- Density (specific gravity)
- 2.62 kg/L (21.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 18 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8807 data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8807, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.104 L/m² for Interdur 8807, excluding application losses. That is about 10.4 L per 100 m². At a wet film of 69–139 µm, coverage is 3.66 m² per kg. All figures are calculated.
System and application
Interdur 8807 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Interdur 8807 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8807 Solvent-borne inorganic zinc silicate primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8807
- System selection for Interdur 8807: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8807: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8807: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

