Industrial coatings
Interdur 8806 Solvent-borne inorganic zinc silicate primer
Home | All models | Industrial coatings | Interdur 8806
Interdur 8806 Solvent-borne inorganic zinc silicate primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. Its function is zinc-rich priming. The data sheet gives: solids 72% · spreading rate 9.60 m²/L · DFT 50-100 µm (2-4 mil) · density 2.49 kg/L (20.8 lb/US gal). Drying at 25 °C: 5 h touch dry, 18 h hard dry.
Basic data
- Model
- Interdur 8806
- Product type
- Solvent-borne inorganic zinc silicate primer
- Category
- Industrial coatings
- Volume solids
- 72%
- Theoretical spreading rate
- 9.60 m²/L
- Recommended dry film thickness
- 50-100 µm (2-4 mil)
- Density (specific gravity)
- 2.49 kg/L (20.8 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 18 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8806 data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8806, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.104 L/m² for Interdur 8806, excluding application losses. That is about 10.4 L per 100 m². At a wet film of 69–139 µm, coverage is 3.86 m² per kg. The values above are calculated.
System and application
Interdur 8806 as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interdur 8806 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8806 Solvent-borne inorganic zinc silicate primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8806
- System selection for Interdur 8806: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8806: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8806: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

