Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8805 Zinc-dust primer

Home | All models | Industrial coatings | Interdur 8805

Interdur 8805 Zinc-dust primer is an inorganic zinc silicate coating for primer use, supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides zinc-rich priming. Published figures are: density 2.15 kg/L (17.9 lb/US gal) · solids 63% · spreading rate 8.40 m²/L · DFT 50-75 µm (2-3 mil). At 25 °C it is 10 min touch dry and 60 min hard dry.

Industrial coatingsPrimerZinc-rich primerInorganic zinc silicate

Basic data

Model
Interdur 8805
Product type
Zinc-dust primer
Category
Industrial coatings
Volume solids
63%
Theoretical spreading rate
8.40 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
2.15 kg/L (17.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 10 min / Hard dry 60 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8805 data sheet; other conditions are not listed.
Other parameters
For Interdur 8805, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.119 L/m² for Interdur 8805, excluding application losses. That is about 11.9 L per 100 m². At a wet film of 79–119 µm, coverage is 3.91 m² per kg. These are theoretical values.

System and application

Interdur 8805 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Interdur 8805 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8805 Zinc-dust primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8805 Zinc-dust primer

  • System selection for Interdur 8805 Zinc-dust primer: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8805 Zinc-dust primer: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8805 Zinc-dust primer: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.