Interdur 8802 is an epoxy coating for primer use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.54 kg/L (12.9 lb/US gal), DFT 75-100 µm (3-4 mil), spreading rate 8.93 m²/L, solids 67%. Drying at 25 °C: 20 min touch dry, 2 h hard dry.
Basic data
- Model
- Interdur 8802
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 67%
- Theoretical spreading rate
- 8.93 m²/L
- Recommended dry film thickness
- 75-100 µm (3-4 mil)
- Density (specific gravity)
- 1.54 kg/L (12.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 20 min / Hard dry 2 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8802 data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8802, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.112 L/m² for Interdur 8802, excluding application losses. That is about 11.2 L per 100 m². At a wet film of 112–149 µm, coverage is 5.80 m² per kg. These are theoretical values.
System and application
Interdur 8802 as a primer, Surface preparation comes first. Its mixing ratio and pot life follow that data sheet.
Consumption for Interdur 8802 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8802 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8802
- System selection for Interdur 8802: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8802: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8802: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

