Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8801 Protective primer after blasting

Home | All models | Industrial coatings | Interdur 8801

Interdur 8801 Protective primer after blasting is an epoxy coating for primer use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: density 1.53 kg/L (12.8 lb/US gal), spreading rate 11.75 m²/L, solids 47%. At 25 °C it is 30 min touch dry and 8 h hard dry.

Basic data

Model
Interdur 8801
Product type
Protective primer after blasting
Category
Industrial coatings
Volume solids
47%
Theoretical spreading rate
11.75 m²/L
Density (specific gravity)
1.53 kg/L (12.8 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 8 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8801 data sheet; other conditions are not listed.
Other parameters
For Interdur 8801, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.085 L/m² for Interdur 8801, excluding application losses. That is about 8.5 L per 100 m². Coverage is 7.68 m² per kg. All figures are calculated.

System and application

Interdur 8801 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for Interdur 8801 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8801 Protective primer after blasting”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8801

  • System selection for Interdur 8801: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8801: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8801: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.