Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intercure 4500 Polyaspartic topcoat

Home | All models | Industrial coatings | Intercure 4500

Intercure 4500 Polyaspartic topcoat is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: DFT 150-250 µm (6-10 mil) · spreading rate 4.40 m²/L · solids 77% ± 2% · density 1.5 kg/L (12.5 lb/US gal). At 25 °C it is 30 min touch dry and 2 h hard dry.

Basic data

Model
Intercure 4500 (Polyaspartic topcoat)
Product type
Polyaspartic topcoat
Category
Industrial coatings
Volume solids
77% ± 2%
Theoretical spreading rate
4.40 m²/L
Recommended dry film thickness
150-250 µm (6-10 mil)
Density (specific gravity)
1.5 kg/L (12.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 2 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 4500 (Polyaspartic topcoat) data sheet; other conditions are not listed.
Other parameters
For Intercure 4500, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.227 L/m² for Intercure 4500, excluding application losses. That is about 22.7 L per 100 m². At a wet film of 195–325 µm, coverage is 2.93 m² per kg. The values above are calculated.

System and application

Intercure 4500 as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Intercure 4500 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 4500 Polyaspartic topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Intercure 4500 Polyaspartic

  • System selection for Intercure 4500 Polyaspartic: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intercure 4500 Polyaspartic: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intercure 4500 Polyaspartic: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.