Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intercure 384 High-build intermediate

Home | All models | Industrial coatings | Intercure 384

Intercure 384 High-build intermediate is an epoxy coating for intermediate use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 72% · density 1.79 kg/L (14.9 lb/US gal) · DFT 125-175 µm (5-7 mil) · spreading rate 5.80 m²/L. At 25 °C it is 2.5 h touch dry and 3.5 h hard dry.

Industrial coatingsIntermediateEpoxy

Basic data

Model
Intercure 384
Product type
High-build intermediate
Category
Industrial coatings
Volume solids
72%
Theoretical spreading rate
5.80 m²/L
Recommended dry film thickness
125-175 µm (5-7 mil)
Density (specific gravity)
1.79 kg/L (14.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2.5 h / Hard dry 3.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 384 data sheet; other conditions are not listed.
Other parameters
For Intercure 384, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.172 L/m² for Intercure 384, excluding application losses. That is about 17.2 L per 100 m². At a wet film of 174–243 µm, coverage is 3.24 m² per kg. The values above are calculated.

System and application

Intercure 384 is applied as an intermediate. The coats either side must meet the system requirements. Its mixing ratio and pot life are set out in the technical data.

Technical data for Intercure 384 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 384 High-build intermediate”; parameters not listed here are governed by that data sheet.

Enquiries on Intercure 384 High-build

  • System selection for Intercure 384 High-build: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intercure 384 High-build: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intercure 384 High-build: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.