Industrial coatings
Intercure 200 Fast-drying epoxy primer
Home | All models | Industrial coatings | Intercure 200
Intercure 200 Fast-drying epoxy primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. Published figures are: density 1.6 kg/L (13.4 lb/US gal) · DFT 75-100 µm (3-4 mil) · spreading rate 8.93 m²/L · solids 67%. Drying at 25 °C: 20 min touch dry, 2 h hard dry.
Basic data
- Model
- Intercure 200 (Fast-drying epoxy primer)
- Product type
- Fast-drying epoxy primer
- Category
- Industrial coatings
- Volume solids
- 67%
- Theoretical spreading rate
- 8.93 m²/L
- Recommended dry film thickness
- 75-100 µm (3-4 mil)
- Density (specific gravity)
- 1.6 kg/L (13.4 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 20 min / Hard dry 2 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 200 (Fast-drying epoxy primer) data sheet; other conditions are not listed.
- Other parameters
- For Intercure 200, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.112 L/m² for Intercure 200, excluding application losses. That is about 11.2 L per 100 m². At a wet film of 112–149 µm, coverage is 5.58 m² per kg. These are theoretical values.
System and application
Intercure 200 as a primer, Surface preparation comes first. Its mixing ratio and pot life follow that data sheet.
Consumption for Intercure 200 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 200 Fast-drying epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercure 200 Fast-drying
- System selection for Intercure 200 Fast-drying: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercure 200 Fast-drying: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercure 200 Fast-drying: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

