Intercryl 520 is a water-borne coating for primer and topcoat use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: density 1.31 kg/L (10.9 lb/US gal), solids 44%, spreading rate 8.80 m²/L. Drying at 25 °C: 30 min touch dry, 1 h hard dry.
Basic data
- Model
- Intercryl 520
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 44%
- Theoretical spreading rate
- 8.80 m²/L
- Density (specific gravity)
- 1.31 kg/L (10.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 1 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercryl 520 data sheet; other conditions are not listed.
- Other parameters
- For Intercryl 520, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.114 L/m² for Intercryl 520, excluding application losses. That is about 11.4 L per 100 m². Coverage is 6.72 m² per kg. The values above are calculated.
System and application
Intercryl 520 as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intercryl 520 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercryl 520 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercryl 520
- System selection for Intercryl 520: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercryl 520: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercryl 520: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

