Industrial coatings
Intercrete 4871 Anti-corrosive protection
Home | All models | Industrial coatings | Intercrete 4871
Intercrete 4871 Anti-corrosive protection is a water-borne coating, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 100% (wet film equals cured dry film) · density 1800 kg/m³ (112.369 lb/ft³). Drying at 20 °C: 5 h touch dry, 18 h hard dry.
Basic data
- Model
- Intercrete 4871
- Product type
- Anti-corrosive protection
- Category
- Industrial coatings
- Volume solids
- 100% (wet film equals cured dry film)
- Density (specific gravity)
- 1800 kg/m³ (112.369 lb/ft³)
- Drying (20°C substrate temperature)
- Touch dry 5 h / Hard dry 18 h
- Drying conditions
- Values are taken from the 20 °C substrate-temperature row of the drying table in the Intercrete 4871 data sheet; other conditions are not listed.
- Other parameters
- For Intercrete 4871, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Without a listed rate, consumption for Intercrete 4871 is assessed from the TDS.
System and application
For Intercrete 4871, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
TDS and SDS for Intercrete 4871 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercrete 4871 Anti-corrosive protection”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercrete 4871
- System selection for Intercrete 4871: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercrete 4871: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercrete 4871: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

