Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interchar 1120 Water-borne intumescent fire protection

Home | All models | Industrial coatings | Interchar 1120

Interchar 1120 Water-borne intumescent fire protection is supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides fire protection. Published figures are: spreading rate 0.97 m²/L, DFT 300-700 µm (12-28 mil), density 1 .4 kg/L (11.7 lb/US gal), solids 68% ± 3%. At 25 °C it is 2 h touch dry and 4 h hard dry.

Industrial coatingsFire protectionWater-borne

Basic data

Model
Interchar 1120 (Water-borne intumescent fire protection)
Product type
Water-borne intumescent fire protection
Category
Industrial coatings
Volume solids
68% ± 3%
Theoretical spreading rate
0.97 m²/L
Recommended dry film thickness
300-700 µm (12-28 mil)
Density (specific gravity)
1 .4 kg/L (11.7 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 4 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interchar 1120 (Water-borne intumescent fire protection) data sheet; other conditions are not listed.
Other parameters
For Interchar 1120, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 1.031 L/m² for Interchar 1120, excluding application losses. That is about 103.1 L per 100 m². At a wet film of 441–1029 µm, coverage is 0.97 m² per kg. These are theoretical values.

System and application

The substrate condition for Interchar 1120 has to be checked before application. Its mixing ratio and pot life follow that data sheet.

Technical data for Interchar 1120 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interchar 1120 Water-borne intumescent fire protection”; parameters not listed here are governed by that data sheet.

Enquiries on Interchar 1120

  • System selection for Interchar 1120: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interchar 1120: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interchar 1120: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.