Industrial coatings
Interbond 2340UPC New-generation epoxy-phenolic high-temperature coating
Home | All models | Industrial coatings | Interbond 2340UPC
Interbond 2340UPC New-generation epoxy-phenolic high-temperature coating is supplied under the International Paint brand. It sits in the Industrial coatings range. It provides heat resistance. Technical data list: DFT 100-200 µm (4-8 mil), spreading rate 3 m²/L, solids 60%, density 1.22 kg/L. At 20 °C it is 4 h touch dry and 6 h hard dry.
Basic data
- Model
- Interbond 2340UPC (New-generation epoxy-phenolic high-temperature coating)
- Product type
- New-generation epoxy-phenolic high-temperature coating
- Category
- Industrial coatings
- Volume solids
- 60%
- Theoretical spreading rate
- 3 m²/L
- Recommended dry film thickness
- 100-200 µm (4-8 mil)
- Density (specific gravity)
- 1.22 kg/L (10.2 lb/US gal)VOC3.25 lb…
- Drying (20°C substrate temperature)
- Touch dry 4 h / Hard dry 6 h
- Drying conditions
- Values are taken from the 20 °C substrate-temperature row of the drying table in the Interbond 2340UPC (New-generation epoxy-phenolic high-temperature coating) data sheet; other conditions are not listed.
- Other parameters
- For Interbond 2340UPC, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.333 L/m² for Interbond 2340UPC, excluding application losses. That is about 33.3 L per 100 m². At a wet film of 167–333 µm, coverage is 2.46 m² per kg. All figures are calculated.
System and application
The substrate condition for Interbond 2340UPC has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Interbond 2340UPC are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interbond 2340UPC New-generation epoxy-phenolic high-temperature coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interbond 2340UPC
- System selection for Interbond 2340UPC: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interbond 2340UPC: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interbond 2340UPC: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

