Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings / Marine coatings

Interbond 1202UPC General-purpose pipeline coating

Home | All models | Industrial coatings | Interbond 1202UPC

Interbond 1202UPC General-purpose pipeline coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides heat resistance. The data sheet gives: DFT 100-200 µm (4-8 mil), spreading rate 5.60 m²/L, solids 56%, density 1.25 kg/L (10.4 lb/US gal). At 25 °C it is 30 min touch dry and 3 h hard dry. Interbond 1202UPC is used in both industrial and marine work.

Basic data

Model
Interbond 1202UPC (General-purpose pipeline coating)
Product type
General-purpose pipeline coating
Category
Industrial coatings / Marine coatings
Volume solids
56%
Theoretical spreading rate
5.60 m²/L
Recommended dry film thickness
100-200 µm (4-8 mil)
Density (specific gravity)
1.25 kg/L (10.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 3 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interbond 1202UPC (General-purpose pipeline coating) data sheet; other conditions are not listed.
Other parameters
For Interbond 1202UPC, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.179 L/m² for Interbond 1202UPC, excluding application losses. That is about 17.9 L per 100 m². At a wet film of 179–357 µm, coverage is 4.48 m² per kg. The values above are calculated.

System and application

The substrate condition for Interbond 1202UPC has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Interbond 1202UPC are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interbond 1202UPC General-purpose pipeline coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interbond 1202UPC

  • System selection for Interbond 1202UPC: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interbond 1202UPC: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interbond 1202UPC: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.