Enviroline 405HTR is an epoxy coating, supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides heat resistance. Published figures are: density 1.57 kg/L · solids 98% ± 2% · spreading rate 1.30 m²/L · DFT 500-1500 µm (20-60 mil). At 25 °C it is 2.5 h touch dry and 6.5 h hard dry.
Basic data
- Model
- Enviroline 405HTR
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 98% ± 2%
- Theoretical spreading rate
- 1.30 m²/L
- Recommended dry film thickness
- 500-1500 µm (20-60 mil)
- Density (specific gravity)
- 1.57 kg/L (13.1 lb/US gal)VOC0.20 lb…
- Drying (25°C substrate temperature)
- Touch dry 2.5 h / Hard dry 6.5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Enviroline 405HTR data sheet; other conditions are not listed.
- Other parameters
- For Enviroline 405HTR, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.769 L/m² for Enviroline 405HTR, excluding application losses. That is about 76.9 L per 100 m². At a wet film of 510–1531 µm, coverage is 0.83 m² per kg. These are theoretical values.
System and application
The substrate condition for Enviroline 405HTR has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Enviroline 405HTR are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Enviroline 405HTR ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Enviroline 405HTR
- System selection for Enviroline 405HTR: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Enviroline 405HTR: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Enviroline 405HTR: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

