Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Enviroline 222 Two-component polyamine-cured lining system

Home | All models | Industrial coatings | Enviroline 222

Enviroline 222 Two-component polyamine-cured lining system is an epoxy coating, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 500-2500 µm (20-100 mil) · density 1.62 kg/L (13.5 lb/US gal) · solids 100% · spreading rate 0.70 m²/L. Drying at 25 °C: 1 h touch dry, 2 h hard dry.

Basic data

Model
Enviroline 222
Product type
Two-component polyamine-cured lining system
Category
Industrial coatings
Volume solids
100%
Theoretical spreading rate
0.70 m²/L
Recommended dry film thickness
500-2500 µm (20-100 mil)
Density (specific gravity)
1.62 kg/L (13.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 1 h / Hard dry 2 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Enviroline 222 data sheet; other conditions are not listed.
Other parameters
For Enviroline 222, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 1.429 L/m² for Enviroline 222, excluding application losses. That is about 142.9 L per 100 m². At a wet film of 500–2500 µm, coverage is 0.43 m² per kg. All figures are calculated.

System and application

For Enviroline 222, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

TDS and SDS for Enviroline 222 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Enviroline 222 Two-component polyamine-cured lining system”; parameters not listed here are governed by that data sheet.

Enquiries on Enviroline 222

  • System selection for Enviroline 222: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Enviroline 222: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Enviroline 222: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.